Download El Capitan Installer To Usb

How To Install Mac OS X El Capitan 10.11.6 Using USB In PC/Laptop?.First You Need Mac OS X ImageDownload From: http://extra.to/torrent. 1: Rename the USB Flash Drive to Become the OS X El Capitan Bootable Installer. The next thing you’ll want to do is rename the target volume that you wish to turn into a bootable installer drive, in this case an external USB flash drive. To avoid any confusion, we’re naming the USB drive to “ElCapInstaller” (without the quotations.

  1. Download El Capitan Installer Usb
  2. Apple Download El Capitan Installer
  3. Download El Capitan Installer To Usb Windows 7
  4. Download El Capitan Installer To Usb Port
  5. Download El Capitan Installer To Usb Driver
  6. Make El Capitan Install Usb

Introduction

  1. Here is a vanilla guide to installing El Capitan on your PC! Preparing the USB Installation Drive. First things first. We need to prepare a USB thumb drive that will contain the installation files as well as the bootloader and custom kexts for our specific Hackintosh build. Download El Capitan from the Mac App Store.
  2. How to Create a OS X El Capitan Boot Installer USB Flash Drive.

Apple officially released OS X 10.11 El Capitan operating system in September 2015 as an update through Apple App Store. This actualization will update core of your system and preserve your user data.

To create bootable USB installer for Mac to Install Mac OS X El Capitan on Windows, on Mac or VirtualBox, you have to create bootable USB flash drive. Let’s get started on how to do it. First, you have to download TransMac software for Windows and install it on your computer. But to install or reinstall a recent version of OS X, you must either download a non-bootable installer from the Mac App Store or (via OS X’s invisible, bootable recovery partition) download 6GB.

However, if you want to have a clean installation of El Capitan on your Mac you will need to create a special installation USB drive and in this article we will show you how.

Four ways how to create El Capitan USB installation flash drive:

Preparation - get OS X El Capitan installer and USB flash drive

Download El Capitan installer (Install OS X El Capitan.app in Applications folder) available in Mac App Store.

Prepare a flash drive with OS X Disk Utility. Format it with GUID Partition Table and name it as Untitled. The minimal capacity of flash drive must be 8 GB.

How to create El Capitan installation USB drive with createinstallmedia tool

The createinstallmedia is a command line tool distributed with OS X installer.

When you have prepared your USB flash drive and El Capitan installer is downloaded from App Store ► open Terminal and type command:

sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install OS X El Capitan.app --nointeraction

In our case 'Untitled' is the name of USB flash drive! Replace 'Untilled' by name of your flash drive.
Wait a few minutes and your El Capitan installation USB drive will be prepared.

Bootable Usb Mac Os Sierra

To install OS X El Capitan ► restart computer ► hold the Option key and select Installation USB drive from the menu.

How to create El Capitan USB installation with Terminal commands

When your USB flash drive is ready and El Capitan installer downloaded from App Store ► Open Terminal and type the following sequence of commands:

sudo hdiutil attach /Applications/Install OS X El Capitan.app/Contents/SharedSupport/InstallESD.dmg

sudo asr restore -source /Volumes/OS X Install ESD/BaseSystem.dmg -target /Volumes/Untitled -erase -format HFS+

sudo rm /Volumes/OS X Base System/System/Installation/Packages

sudo cp -a /Volumes/OS X Install ESD/Packages /Volumes/OS X Base System/System/Installation/Packages

sudo cp -a /Volumes/OS X Install ESD/BaseSystem.chunklist /Volumes/OS X Base System

sudo cp -a /Volumes/OS X Install ESD/BaseSystem.chunklist /Volumes/OS X Base System

sudo cp -a /Volumes/OS X Install ESD/BaseSystem.dmg /Volumes/OS X Base System

hdiutil detach /Volumes/OS X Install ESD

Now wait until your bootable installation flash drive with OS X 10.11 El Capitan is made.

To install OS X El Capitan ► restart computer ► hold the Option key and select Installation USB drive from the menu.

How to create El Capitan USB installation with Disk Utility and Finder

When your USB flash drive is ready and El Capitan installer downloaded from App Store ► Open Terminal and type:

Create Bootable Usb Os X

defaults write com.apple.finder AppleShowAllFiles 1 && killall Finder

This command allows you to view hidden files in Finder.

Now Open Finder ► Applications ► Install OS X El Capitan.app ► right click ► Select Show Package Contents option.

Navigate to Contents/SharedSupport ► Mount InstallESD.dmg file

Open OS X Install ESD archive in Finder and mount BaseSystem.dmg archive

Connect USB drive and open Disk Utility (/Applications/Utilities)

Select the USB drive from the list of disks, select Restore tab and pick Select OS X Base System archive as a source and USB flash drive as the destination. When ready click on Restore button.

After the Restore process is finished, open Finder ► open USB drive (OS X Base System) ► go to the System/Installation folder and select Packages file and delete it.

Open OS X Install ESD volume in Finder, select Packages folder and copy them to System/Installation folder on USB drive.

Also copy BaseSystem.chunklist and BaseSystem.dmg files from InstallESD.dmg volume to root of USB flash drive (OS X Base System).

Now your El Capitan installation USB drive is prepared and ready for use.

To install OS X El Capitan ► restart computer ► hold the Option key and select Installation USB drive from the menu.

How to create El Capitan USB installation disk with DiskMaker X

DiskMaker X tool is Wizard like tool that allows you create OS X installation disk. Download DiskMaker X to your Mac and copy it to Applications folder.

When you have prepared your USB flash drive and El Capitan installer is downloaded from App Store ► open DiskMaker X.

Select version of OS X (in our case El Capitan)

Select copy of OS X installation app

Select USB drive that will be used for USB installation

And wait a few minutes till the the DiskMaker X finish creating process.

To install OS X El Capitan ► restart computer ► hold the Option key and select Installation USB drive from the menu.

In this article, I will show you How to create Bootable USB for Mac OS El Capitan on Windows using Transmac.Bliss font family free download mac. Therefore, you can create bootable USB for your Mac using Transmac on windows 10/7/8/8.1 here you will learn the easiest method of creating bootable USB. As you know that Mac OS EL Capitan is the newest version among Mac. In here just follow my steps to create a bootable USB installer for your Mac. is the twelfth major of the Mac operating system. Therefore, it has outstanding features that the previous version of Mac doesn’t have that. It is better now that we should create a bootable USB installer drive to install Mac OS.

You all have the information about “Transmac” software about its function that how it works, or how to download “TransMac” and how to install that on your Windows PC? However, you need the following requirements to create a great bootable USB installer for Mac OS El Capitan.

Why we use TransMac to Create bootable USB for mac os el Capitan?

TransMac is a simple application to open hard drives disk, Flash drives, CD/DVD high-density floppy disk on Windows 10/7/8/8.1 or lower version of other Windows. to use this application you just need to insert the drive you need, and one of the great function is this that it will automatically read the drives, TransMac is a great tool that you can access the Mac file on Windows operating system using TransMac.

TransMac Features

  • You are allowed to use the TransMac for 15 days trial, and after that, if you want to use that more then 15 days then you need to purchase that. All the features are the same for Mac.
  • The system requirements are you need Windows 10/7/8/8.1 or Windows Vista and XP.
  • The users can buy TransMac for $59.00 with the license.
  • Apple files system (APFS) are only supported.
  • Open Mac APFS/HFS/HFS+ format disk drives, flash drives, CD/DVD/Blu-ray media, HD floppies, dmg, dmg part, sparse bundle, and sparseimage files.
  • Copy files to Mac and image file
  • Format HFS to Mac
  • Save and restore image files to disk and USB flash.
  • Create, compress image files for Mac
  • Burn your ISO file and dmg file directly to CD/DVD Blu-ray.
  • View the partition layout

Now Create bootable USB for Mac OS El Capitan on Windows

Download Mac Os X El Capitan Bootable Usb Windows 10

Now it is the time to create a bootable USB installer using TransMac, To install Mac OS El Capitan on VirtualBox on Windows 10 you need a Bootable USB here you will learn the steps of creating a bootable USB installer for Mac OS El Capitan on Windows.

Step #1. Before going to create a bootable USB for Mac OS El Capitan you need to download TransMac. Therefore, you can download TransMac from the given link. After that, you are download TransMac now install that on your computer, the installation process is too much easy everyone can install that on their PC/Computer with a simple procedure. Just click on the setup file and with some click, the installation will finish. After that, Launch TransMac when TransMac is launched you will see the list of Flash drives or local disk. Then Right-click on that flash you want to create bootable USB for Mac OS El Capitan then select Restore with Disk Image.

Restore with the Disk image

Step #2. Now a warning message will pop-up after you select Restore with Disk Image, and in this step, select Yes.

Step #3. After that, you clicked on yes now a dialogue box will come just click on that and browse for VMDK file and select the file and click Open.

Mac Os Bootable Usb Windows

select Mac OS EL Capitan VMDK file

Download

Step #4. After that, you clicked on Open in here your file will be ready to copy on USB drive click on “OK”.

Copying your File VMDK file to USB

Download Mac Os X El Capitan Bootable Usb 3.0

Step #5. After that, you clicked OK now in this step, your Mac OS EL Capitan VMDK file will copy to your USB drive. Have patience and wait for some minutes that should copy your file.

Copying Mac OS EL Capitan File to USB

Conclusion

Install Mac Os From Bootable Usb

That’s all about it,Now you are totally done with creating the USB drive. Therefore, if you faced any problem regarding this you can comment on below comment box and share your ideas. Furthermore, we will discuss that and don’t forget to subscribe our website with your email address and have a notification about our latest post.

Mac operating system’s twelfth major version is the El Capitan Installer (version 10.11). All the Mac computers which don’t have the privilege to upgrade to MacOS High Sierra or the computers that need to upgrade to El Capitan first, can download this twelfth version on the computer. This is the very last version of the Mac operating system which comes under the name OS X. And it is named as ‘El Capitan’ after the formation of a rock in the Yosemite National Park. El Capitan Installer is the post version to the Yosemite, and it was built by adding up more improvements to the Yosemite. In this version of the Mac operating system, the Apple Inc. has focused on the performance, stability, and security of the computer. Anyone who is interested can download it on the Mac PC.

How to download El Capitan Installer?

If you want to upgrade to OS X El Capitan, first you have to collect gather your Mac PC and then download the El Capitan Installer. That’s what we are going to do now.

  1. Go to the App Store and open the El Capitan page there.
  2. Then you must click on the ‘Download; button on the El Capitan Page.
  3. If your Mac PC is compatible to perform this upgrade, a file named ‘Install OS X El Capitan’ will download to your Applications folder.
  4. The installer will open automatically after finishing the download process. All you have to do next is click on the ‘Continue’ button and follow the onscreen instructions.

Upgrade Mac OS Version with El Capitan Installer while Protecting your Data

Before executing the Upgrade, you must prepare the Mac PC for the El Capitan Update. For that, gather these requirements first.

  • The Mac PC must have at least 2GB of memory and 8.8GB of storage space.
  • The PC must have at least 45% of battery life.
  • Connect the Mac PC to Wi-Fi or any other internet connection.
  • The Mac Apps must be up to date with the latest versions.
  • Take backups of all your personal data and present OS of the Mac PC.

Important! It is very important to backup your important data on the Mac PC to an external storage device because it will help you to avoid the data loss issues. If any case, you forgot to backup the data, your data may be lost while executing the El Capitan Installer update. So make sure you make a backup of the device data.

How to use El Capitan Installer for a Clean Install?

01. El Capitan Clean Install on Empty Volume with El Capitan Installer

Download El Capitan Installer Usb

This is the easiest method for the clean install. Here, you can install the OS X El Capitan Installer onto an empty volume, or you can use a storage space that has the content which no longer needed and don’t mind removing. What it matters here is that you don’t use the current startup volume as the destination here. What makes this method easier is the fact that it is possible to perform this clean install while booted from the current startup drive. You don’t need a special, custom-made startup environment for the empty volume clean install. All you have to do is, start up the installer and go.

02. El Capitan Clean Install on Startup Volume with El Capitan Installer

This is the most common method of the two. Usually, the clean install process deletes the contents of the destination drive. Therefore, if you choose the startup drive method to perform the clean install of El Capitan Installer, you have to follow some extra steps as well.

  • First, you have to create a bootable USB flash drive that has the Installer of OS X El Capitan.
  • Then erase the startup drive.
  • After then, start the clean install process.

How to Create El Capitan Installer with USB?

Requirements

  • The USB flash drive must be at least 8GB
  • El Capitan Installer must be on the Mac PC’s Applications folder.

Process

  • Plug the USB drive into the Mac PC with the Installer of the El Capitan on it.
  • Rename the USB driver using an easy to remember and use name. (For the ease of the steps ahead, I will rename it as ‘ElCaptIns’)
  • Be sure that the Installer of the El Capitan named ‘Install OS X El Capitan.app’ is in its default location (Applications folder).
  • Select and copy the text of the below-mentioned terminal command.
    • sudo/Applications/InstallOSXElCapitan.app/Contents/Resources/createinstallmedia --volume /Volumes/ElCaptIns --applicationpath /Applications/Install OS X El Capitan.app
  • Now you can launch the terminal in the Applications/Utilities/
  • In this step, it deletes the data in the destination drive. So make sure it doesn’t contain any valuable data and paste the copied command into the terminal, then press ‘Return’.
  • When the windows prompted, enter the admin level account password of yours and press to Return.
  • Then a message telling “To continue we need to erase the disk at /Volumes/ElCaptIns. If you wish to continue, type (Y) then press return:” will emerge. You can type ‘Y’ and press to return to continue. You are already set if you don’t see this message.

USB installer and El Capitan Installer in Apple Store

El Capitan Installer is only available in the Mac App Store. So you can only download it from the App Store. By the way, having a USB installer to perform the El Capitan is a good idea. Because having a copy of the OS version in a separate device ensures that you always have a backup plan to install it or re-install it on the PC. When you have the USB installer with the El Capitan Installer in it, you no longer need the internet connection or the access to the Mac App Store to perform the upgrade.

What is createinstallmedia?

“createinstallmedia” is a unix program hidden inside the OS X Installer which is provided by the Apple Inc. to create a bootable installer drive. createinstallmedia is the ideal and the easier to use tool if you are comfortable to use the terminal. This is only available for the OS versions of Lion (OS X 10.7) and above.



System and Hardware Requirements for El Capitan Installer

System Requirements

  • iMac models from mid 2007 or later
  • MacBook models from late 2008 or later
  • MacBook Pro models from mid 2007 or later
  • MacBook Air models from late 2008 or later
  • Mac mini models from early 2009 or later
  • Mac Pro models from early 2008 or later
  • Xserve models from early 2009

Apple Download El Capitan Installer

Hardware Requirements

  • OS X v10.6.8 or later
  • 2GB of memory
  • 8.8GB of available storage
  • Some features require an Apple ID (terms apply)
  • Some features require a compatible Internet service provider (fees may apply)

FAQs:-

Download El Capitan Installer To Usb Windows 7

01. What is the best method to install El Capitan?

Download El Capitan Installer To Usb Port

You can either use the default method to upgrade install or clean install methods to get El Capitan Installer but, without any doubt, Clean Install is the best method to upgrade your Mac OS. I hope all the above facts prove that.

02. How to save previous data when upgrading the OS X?

Simply, take a backup by using the Time Machine.

  1. Open the Time Machine app.
  2. Click on the ‘Select Backup Disk’.
  3. Select the external drive or internal location where you want to save the files.
  4. Click on the ‘On’ to turn on the Time Machine.
  5. Click on the Arrow Clock icon in the Finder Bar at the top of your screen and select ‘Backup Now’.

Download El Capitan Installer To Usb Driver

03. Is it secure to install El Capitan without Apple Store?

Make El Capitan Install Usb

No, it is not safe to get El Capitan Installer outsider of the Apple Store. It is only safe to get this OS upgrade from the Mac App Store. Besides, there is no such external place to get this OS upgrade. I have provided the steps to install El Capitan in the above of this site. Just follow those steps and upgrade your Mac PC to the El Capitan.

Comments are closed.